Living cells

Product classification

contact

Company name: Ladd Porter (Beijing) Biotechnology Co., Ltd.

Contact: Zhang Wei

Tel: 010-61841882

Mobile phone: 18101288748

Mailbox: zhangweidp@163.com

Fax: 010-61841882

Website: www.laidebote.com

Address: room 2071, 2 floor, 5 building, No. 5 hospital, Beijing, Chaoyang District.


Pipeline Dispenser

Your current location: Home page >> Products >> Essen BioScience

Pipeline Dispenser

  • Taxonomy:Essen BioScience

  • Click times:
  • Date of release:2018/08/30
  • Online inquiry
Detailed introduction

Aseptic solution distributor

The Pipeline™ dispenser and the Peripette™ consumable provide a fast, accurate and efficient approach to the transfer of sterile fluids. By combining the advantages of a peristaltic pump with the convenience of a sterile consumable, the Pipeline offers an ideal solution for high-throughput research applications.(Sample pretreatment)

Fast and efficient approach to the transfer of sterile fluids:

The Pipeline™ dispenser and the Peripette™ consumable provide a fast, accurate and efficient approach to the transfer of sterile fluids. By combining the advantages of a peristaltic pump with the convenience of a sterile consumable, the Pipeline offers an ideal solution for high-throughput research applications.

Advantages

Most sterile fluid dispensing is done with familiar hand-operated pipette aids. While adequate for low-volume applications, hand-operated pipetting is tedious for large-scale cell culture due to the multiple aspirate, move and dispense steps. In addition, processes such as pipetting into angled T-flasks or removing/ inserting caps can be cumbersome, often requiring both hands and desiring a third.

The Pipeline dispenser eliminates the tedious nature of these tasks. To operate, the user simply snaps in a sterile Peripette ( Peri staltic Pi pette ), lifts the pump head mechanism, inserts the source bottle and lowers the assembly. After setting the desired volume, the user places the destination container under the output spout and initiates the dispense. Pipeline then performs the fluid transfer in a one-step operation.

This saves time and reduces the tiring, repetitive motions (aspirate, move and dispense) as required for hand pipetting. Additionally, the dispenser is ready to repeat the process, as many times as is needed, until the source bottle is empty.

With increased efficiency and high throughput capabilities, Pipeline facilitates repetitive laboratory tasks. For example, Pipeline provides a fast and accurate means for preparing multiple aliquots of a common reagent. Pipeline is also compatible with dispensing cells and suitable for use incell culture. In multi-step procedures, one can use an aspirator along with the Pipeline to exchange cell culture media, solutions and reagents without the need to change multiple pipettes. Overall, the Pipeline dispenser enhances laboratory protocols by promoting consistent technique.

Flexibility

The Pipeline is capable of dispensing in two different modes. The first mode dispenses a user-defined volume of fluid per switch activation, and the second mode dispenses continuously during switch activation. In addition, three different dispense speeds are possible, which allow for the device to be tailored to the most demanding cell culture applications. The user also has the ability to save and recall up to 8 pre-programmed settings, and the unit can be activated via frontpanel switch or foot switch. The accuracy and precision of the dispensed volumes are similar to serological pipettes (see specifications). The Pipeline also provides an RS-232 interface if automation or remote operation is required.

Convenience

The design of the Pipeline dispenser optimizes the space usage inside the bio-cabinet, requiring a base footprint of less than 7” x 10”. When not in use, the pump head can also swivel back out of the way. This head can be configured on either side of the front panel, allowing for convenient positioning on either the left or right wall of the cabinet. In addition, the manual lift operation can accommodate vessels as large as a 2 liter roller bottle.
  • Accurate and precise

  • Promotes consistent technique

  • Increases throughput

  • Reduces tiring, repetitive motions

  • Foot switch operation

  • Designed for use in bio-cabinets


Peripette:

Peristaltic pumpbased systems with flexible tubing have been broadly used in many industries for metering out large volumes of fluid. However, their applications in cell culture have been limited by the complications of maintaining and changing the sterile tubing. These concerns are eliminated by the Peripette (Peri staltic Pipette), a sterile and easy-to-change consumable. Manufactured from USP Class VI components, the Peripette is gamma-radiation sterilized, nonpyrogenic and completely compatible with standard cell culture reagents and methods, including the transfer of suspended cells. The Peripettes are individually packaged in easy-to-open pouches and can be purchased by the shelf pack (qty 50) or by the case (qty 600). One size works for all dispense volumes.
  • Materials meet USPClass VI

  • Gamma-radiation sterilized

  • Non-pyrogenic

  • Compatible with dispensing cells

  • Packaged in easy-to-open pouches

  • Loads quickly into Pipeline


The address of this article:http://en.laidebote.com/product/547.html

Key word:PipelineDispenser,Asepticsolutiondistributor,Liquidseparator

Recently browse:

Related products:

Related news:

Ladd Bert (Beijing) biology


Address: Ladd Porter (Beijing) Biotechnology Co., Ltd.


Website:www.laidebote.com


Fax:010-61841882


Copyright: Ladd Porter (Beijing) Biotechnology Co., Ltd.

热推产品  |  主营区域: 山东 济南 聊城 德州 临沂 淄博 天津 济宁 上海 北京
Living cells